1. Wavelength: NON- Channel 808nm OEM customized service
2. Working frequency： 1~10hz Maximum frequency 20 Hz
3. Energy density：1-120j/cm2： 1-150j/cm2 optional
4. Handle piece cooling： TEC+sapphire Sapphire size customizable
5. Spot size： 15cm×15cm（standard） or 25 x31mm (Spot size and window of light customizable)
6. Output power: 300W OR 600w(Standard), 900w. 1200w （Laser power available)
7. Shots: over 10,000,000
8. Laser bars: Germany laser Jenoptik，150W/piece
9. Pulse width: 5ms~400ms or 0~1000ms customizable
10. Flow sensor: At least 3.5L/min11. Cooling system: 240×120cooling line(2pc)，18 pcs channel Compressor plan，TEC plan, Fans, Water cooling
808nm diode laser hair removal treatment will be accomplished when destroying hair follicle unit by using thermal damage of laser fluent, thus inhibiting future hair regrowth by follicle. The widely optional pulse duration (20 to 1000ms) of 808nm diode laser system can produce thermal damage in hair matrix stem cells and ensure follicle destruction.
In order to minimize the uncomfortable feeling of thermal damage to the surrounding tissues, an efficient skin-cooling system (sapphire contact cooling tip) was used to chill the skin before, during and after the whole treatment course. Therefore, 808nm diode laser is more effective in treating dark skin.
In order to minimize the uncomfortable feeling of thermal damage to the surrounding tissues, an efficient skin-cooling system (sapphire contact cooling tip) was used to chill the skin before, during and after the whole treatment course. Therefore, 808nm diode laser is more effective in treating dark skin
1. Permanently remove hair for legs, hands, lip, beard, chest, armpit,back, outside
2.Skin care Repair damaged skin safely and quickly; whiten and tighten skin; effective treatment for skin water shortage, coarse skin; minimize
3.face pore, tiny wrinkle, remove vascular; effectively remove spots; improve the elasticity and glossy of skin.
Before & After Treatment:
1. The laser system is Non-channel, which has no risk of burning handle. And the standard to water quality is not high, that greatly reduce the maintenance of probability. In the meantime, And it has long lasting working time.
2. Semi-conductor stack is imported from Germany Jenoptic. In combination with STM32 intelligent control system, the system output stable wavelength laser beam.
3. Well-designed waterway system. With the application of US imported triplex high pressure diapragm pump, the water pump pressure can be raised to 100PSI, which is much higher than other similar devices.
4. Intelligently designed handpiece. The laser calibration parameters have been completely written into a chip inside handpiece, which monitor the laser energy on the real time. And the weight of handle is light, which ease the burden for operator.
How to process hair
1. Cut or shave hair to 1-2mm or ask patients to shave at home 5-7 days before treatment.
2. Clear treatment area.
3. Turn on machine, adjust the parameter, set it to ‘Work’ .
4. Put cooling gel on treatment area about 2mm.
5. Shot the treatment area by moving continually through one place to another place, let the crystal tip to touch cooling gel, You are permitted to have 1/3 overlapping on treatment area.
Guangzhou Sunlight Beauty Technology Co., Ltd.
Contact: Sunlight Service
E-mail: email@example.comADD: NO. 306, Building C, Hetai Commercial square, Hetai Road, Baiyun district, Guangzhou city, Guangdong province, China.